Test
Equipment

Test Equipment
UTP/STP Token Ring Cable Testers | Balun Testers
Tone Generators & Probes | Coaxial & Modular Line Testers

JK Electronics offers all the tools needed to test all your network & premise wiring needs. Unfortunately due to the vast amount of test equipment available we are unable to list every possible item, so if you don't see what you are looking for contact the Sales staff they will be glad to help.

Test Equipment

UTP/STP, Token Ring Cable Testers

Top of Page
{short description of image}

UniTrack Cable tester

The UniTrack hand-held test kit displays complete information from the main unit allowing a single technician to do the job in a fraction of the time that it would have taken two technicians. The unit weighs only 1/2 pound and is easy to operate. The 32 character, 2 line LCD displays wiring information and breaks, shorts, or any other mapping between end-to-end including cross-overs. Can also test local or remote locations for identifying workstations by number.
UniTrack UTP Tester
Part # Description Price
TST-038 UNITRACK, UTP CABLE TESTER KIT $330.66
TST-038-2 REMOTE MAPPING DEVICE $49.27
TST-038-3 REMOTE LOCATOR DEVICE, #1 TO #6 $41.75
TST-038-4 REMOTE LOCATOR DEVICE, #7 TO #12 $41.75
Kit Includes: UniTrack main unit, Remote mapping device, Remote locator #1 to #12, RJ-45 to RJ-11 Adaptor, Patch cords, and Carring case.
{short description of image}

Multi-Check® Plus

Remote contunuity tester for 50 and 75 ohm coaxial cables, unshielded and shielded UTP/STP telephone and network data cables.
  • Test 50 ohm cables up to 1000ft and 75 ohm cables up to 600ft
  • Tests telephone and data cables to EIA/TIA-568 A&B, AT&T 258A, 10-Base T Ethernet, and Token Ring standards
Paladin Multi-Check Plus
Part # Description Price
900690 MULTI-CHECK PLUS TEST KIT $265.00
900691 REPLACEMENT REMOTE UNIT $65.00
Kit Includes: Multi-Check Plus, Patch cords, BNC adaptor and Vinyl carrying case.
{short description of image}

Multi-Patch® Check

Multi-remote tester for unshielded and shielded UTP/STP telephone and network data cables for EIA/TIA 568 A&B, AT&T 258A, 10-Base T Ethernet and Token Ring network systems.
  • Test for shield, open wires, shorts, reversed, crossed, and split pairs
  • Tests up to eight individual remote locations
  • Tests UTP/STP cables up to 1000ft
Paladin Multi-Patch Check
Part # Description Price
900723 MULTI-PATCH CHECK $340.00
900764 REMOTE KIT, NODES 2-4 $113.10
900769 REMOTE KIT, NODES 5-8 $148.41
Kit Includes: Multi-Patch Check, Patch cable, Coupler and Vinyl carrying case.
{short description of image}

IDEAL LinkMaster(TM)

  • Checks continuity and configuration of twisted pair wiring.
  • Tests for open circuits, shorts, miswires, reversals and split pairs.
  • Tests shielded and unshielded cables.
  • Main unit and remote for one person testing.
Ideal Link Master
Part # Description Price
62-200 IDEAL LINKMASTER KIT $94.95
Kit Includes: Multi-Patch Check, Patch cable, Coupler and Vinyl carrying case.
{short description of image}

IDEAL PathFinder(TM) Tester

Designed for installers and maintenance technicians for mapping, testing and troubleshooting installed data communications, phone wiring, and coaxial cable.
  • Indicates opens, shorts, miswires, reversals and split pair conditions.
  • A built-in tone generator enables individual conductor identification and tracing.
Ideal Pathfinder
Part # Description Price
62-080 IDEAL PATHFINDER TESTER ONLY $131.95
62-081 IDEAL PATHFINDER REMOTE A $28.95
62-082 IDEAL PATHFINDER REMOTE B $28.95
62-083 IDEAL PATHFINDER REMOTE C $28.95
62-084 IDEAL PATHFINDER REMOTE D $28.95
33-812 IDEAL PATHFINDER KIT $259.95
Kit Includes: Pathfinder tester, four remote modules and plastic storage case.

Balun Testers

Top of Page
{short description of image}

Unicom Balun Tester

This tester is designed to detect signal and ground pins for baluns with RJ-11 or RJ-45 connectors. It also can test BNC or Twinaxial baluns. The tester has indicator lights for battery self test and diagnostic testing.
Unicom Balun Tester
Part # Description Price
TST-028 BALUN TESTER KIT $197.06
Kit Includes: Balun Tester, BNC to Twinaxial adaptor, RJ-45 and RJ-11 Patch cords & Carrying case.

Tone Generators & Probes

Top of Page
{short description of image}

Tone Test Kit

This kit detects signals through thick cable insulation an walls.

Speaker Probe

  • Quickly and easily identifies cable pairs carrying a tone signal
  • Identifies patch and termination points of wire
  • Audible speaker for use without a lineman's test set
  • Low-output impedance allows captive coupling

Tone Generator

  • Locates broken wire and cable in walls & provides talk power on a dead line
  • checks for opens & shorts with tri-color LED
  • Emits continuous 1kHz or alternating 500/1kHz tone
Paladin Tone Test Kit
Part # Description Price
1568.1 PALADIN SPEAKER PROBE ONLY $46.08
1569.1 PALADIN TONE GENERATOR ONLY $40.83
4344.1 PALADIN PROBE & GENERATOR KIT $99.95
Kit Includes: Speaker Probe, Tone Generator, and Cordura carrying case.
{short description of image}

IDEAL Amplifier Probe

  • Can identification and trace metallic wiring without damage to the conductor insulation.
  • Adjustable sensitivity level lets you zero in on cable groups, pairs and individual wires.

IDEAL Tone Generator

  • Great for locating and identifying open cable pairs, individual conductors, and telephone wires to distances up to 5,000 ft.
  • Besides providing tone generation, it serves as a continuity and polarity tester.
Ideal Tone Test Kit
Part # Description Price
62-100 IDEAL TONE GENERATOR ONLY $29.30
62-104 IDEAL AMPLIFIER PROBE ONLY $64.45
33-804 IDEAL PROBE & GENERATOR KIT $119.95
Kit Includes: Speaker Probe, Tone Generator, and Cordura carrying case.

Coaxial & Modular Line Testers

Top of Page
{short description of image}

IDEAL Wiring Verifier-Patch Cable Tester

Provides fast and reliable testing of continuity and wiring schemes for paired cables terminated with modular plugs as well as verifying conductor continuity for coaxial cables.
  • Indicates opens, shorts, miswires, reversals and crossed pairs when applied to modular plug cable assemblies.
  • Special wiring configurations are accommodated by the Wiring Verifier's unique LEARN mode.
Ideal Wiring Verifier
Part # Description Price
62-050 IDEAL WIRING VERIFIER $96.95
62-055 IDEAL WIRING VERIFIER POUCH ONLY $9.95
Kit Includes: Pathfinder tester, four remote modules and plastic storage case.
{short description of image}

Coax-Check®

Local continuity tester for 50 and 75 ohm coaxial cables including RG58, RG59 and RG62AU.
  • Test 50 ohm cables up to 1000ft and 75 ohm cables up to 600ft
  • identifies open conductor, open shield/braid and shorted connections with a simple pass/fail indicator
  • tests BNC, TNC, N, C and F Connectors using adaptor
Paladin Coax-Check
Part # Description Price
1560 PALADIN COAX-CHECK $43.99
{short description of image}

Coax-Check® Remote

Remote continuity tester for 50 and 75 ohm coaxial cables including RG58, RG59 and RG62AU.
  • Test Remote 50 ohm cables up to 1000ft and 75 ohm cables up to 600ft
  • identifies open conductor, open shield/braid and shorted connections with a simple pass/fail indicator
  • tests BNC, TNC, N, C and F Connectors using adaptor
  • includes 75 ohm BNC adaptor and F/F BNC adaptor
Paladin Coax-Check Remote
Part # Description Price
1565 PALADIN COAX-CHECK REMOTE $49.98
{short description of image}

Patch-Check®

Local continuity tester for Telephone and data cables with RJ-11 and RJ-45 modular plugs.
  • Test cables up to 1000ft
  • identifies open conductor, crossed and shorted connections
  • identifies connector & cable pin-out using true cable mapping, not pairing
Paladin Patch Check
Part # Description Price
1529 PALADIN PATCH-CHECK $59.00
{short description of image}

Patch-Check® Plus

Remote continuity tester for Telephone and data cables with RJ-11 and RJ-45 modular plugs.
  • tests remote cables installed through walls or bulkheads
  • Test cables up to 1000ft
  • identifies open conductor, crossed and shorted connections
  • identifies connector & cable pin-out using true cable mapping, not pairing
  • includes RJ-11, RJ-11 DEC-MMJ and RJ-45 patch cords(two each)
Paladin Patch Check Plus
Part # Description Price
1531 PALADIN PATCH-CHECK PLUS $265.00

Top of Page

Return to the Table of Contents


JK Electronics - Phone (714)890-4001 - Fax (714)892-6175

Home! | Products
Copyright © 1998 JK Electronics, Inc. All rights reserved.

Last updated:
Questions? Comments? Suggestions? Send email to the Webmaster at JK Electronics.